PRODUCT DESCRIPTION

Indicating range 0-6 / 0-30 kN; set of drive-on and drive-off ramps, simple and time saving installation, no foundation work necessary, low drive-over height, roller set in flat design, rollers with wear-proof plastic coating on welded expanded metal mesh, level rollers, motors located at the side of the rollers

  • Analogue display, double scale: indicating range 0-6 / 0-30 kN

  • Set of drive-on and drive-off ramps

  • Two-part galvanised roller set in flat design

  • Rollers with wear-proof plastic coating on welded expanded metalmesh

  • Level rollers

  • Splash-proof motors

  • Rust-proof feeler rolls

  • Measurement with wear-free strain-gauge type load cells

  • Electric automatic drive-off aid

  • Automatic test sequence

  • Interface for printer / PC

  • Simple and time saving installation

  • No foundation work necessary

  • Low drive-over height (225 mm)

  • Determination of braking force, braking force imbalance, rolling friction, ovality

  • Automatic switching in and re-start

  • Cut-out at wheel lock

  • Automatic or manual operation mode

  • Permanent determination of braking force imbalance

  • Automatic zero adjustment

  • Error check routine

  • Display for cars and truck

Expand ▼
safelane® truck
File size : 996.96 Kb
Brake tester/Test lane Max. drive-over load (t) 13
Brake tester Roller coefficient dry / wet > 0.7 - > 0.6
Brake tester Temperature range (°C) 0 - 40
Brake tester Idling speed (km/h) 2.5
Brake tester Roller diameter (mm) 204
Brake tester Roller length (mm) 1000
Brake tester Test width min. (mm) 830
Brake tester Test width max. (mm) 2830
Brake tester Length (mm) 2 x 700
Brake tester Width (mm) 2 x 1920
Brake tester Height (mm) 2 x 225
Brake tester Weight (kg) 2 x 300
Brake tester Power supply (V/Hz) 400 / 50
Brake tester Supply lead (mm²) 5 x 6
Brake tester Fuse rating, slow-blow (A slow-blow) 3 x 36
Brake tester Motor power (kW) 2 x 9.2
Drive-on/drive-off ramps Length per ramp (mm) 2000
Drive-on/drive-off ramps Width per ramp (mm) 1000
Drive-on/drive-off ramps Height per ramp (mm) 190
Drive-on/drive-off ramps Total weight (kg) 180
Display cabinet Measuring range (kN) 0 - 30
Display cabinet Width (mm) 800
Display cabinet Depth (mm) 200
Display cabinet Height (mm) 600
Display cabinet Weight (kg) 35
Weight Roller(s) (kg) 300
Drive on ramps dimesions (W x D x H) (mm) 2000 x 1000 x 190
Drive on ramps weight (kg) 90
Height Trolley (without display cabinet) (mm) 1000
Wide Trolley (without display cabinet) (mm) 930
Depth Trolley (without display cabinet) (mm) 2180
Weight Trolley (without display cabinet) (kg) 50