• Intuitive and easy to use

• Fully automatic

• Touchless mounting/demounting tool


  • wdk certification

  • Automatic leverless mounting and demounting tool never touches the rim

  • Non-contact detection of rim contour by laser

  • Automatic control of mounting and demounting tools, user only has to start operation on the control console

  • Automatic labour-saving and accurate positioning of wheels on clamping flange by means of wheel lift

  • Center-post clamping system with hydraulic locking shaft

  • Two disks dynamic bead breaker with automatic detection of the tyre width and automatic position adjustment to follow the rim contour

  • Pneumatic Bead Depressor - PBD330 for easy demounting high performance tyres

  • Smart Bead Spacer (mounting aid)

  • Bead clamp

  • Mirror for lower bead view

    • Automatic tyre changer monty® quadriga BMW in RAL 7016
    • Wheel lift (70 kg)
    • BMW clamping kit
    • BMW mounting help tool
    • BMW mounting and demounting procedures
    • Set of plastic inserts for demounting finger
    • Plastic tyre protector
    • Polyamide cone optimized for BMW vehicles
    • 24-month warranty

Expand ▼
Hofmann monty quadriga
Plastic protectors 85 mm
Plastic protectors 85 mm

The kit contains 10 protectors

Light truck wheel kit
Light truck wheel kit
Reverse-mounted wheel kit
Reverse-mounted wheel kit

with pins of Ø 24 mm

Special cone for quadriga TC
Special cone for quadriga TC

(polyamide), ideal for alloy rims e.g. of Porsche and Audi; standard equipment of BMW quadriga

Smart bead spacer
Smart Bead Spacer

Holds the bead in 6 positions in the drop center during tire mounting operation. To be used in conjunction with the pneumatic bead assist

Cone kit 42-85 mm
Cone kit 42-85 mm

consisting of 1 steel cone EAM0082G10A to centre steel / alloy wheels before clamping and 5 plastic protectors EAC0102G27A

Bead clamp
Bead clamp

To facilitate mounting of the upper bead, especially on low profile and stiff tires

BMW clamping kit
BMW clamping kit

for standard and reverse mounted wheels, consisting of:
Cylindrical vertex pin L.110mm.
Tapered vertex pin L.110mm.
Reduction cone: onty 8600 only
Flange for studs BMW
Standard on monty 8600 BMW and for monty quadriga 1 BMW


kit BMW TC

The BMW tyre changer machines include a special clamping kit, dictated by BMW AG.
• Cylindrical vertex pin l.110mm
• Tapered vertex pin l.110mm
• Flange for BMW vehicles with stud pitch holes diameter of 5x112mm and 5x120mm
• Flange for MINI vehicle



The centre-clamp design has numerous benefits: most important is the drastically reduced risk of damage and that there are no restrictions of the turntables with clamping jaws, while automatic locking of the wheel provides fast, safe and correct clamping of the wheel.



The ergonomic wheel lift reduces fatigue on the operator and increases productivity.

M/D tool technology
Tower technology
Clamping System Automatic pilot hole
Tool vertical positioning
Jaw type
Rim diameter 12 - 30
Outside clamping range
Inside clamping range
Max wheel width 431 mm
Max wheel width 17 inch
Max. Wheel diametre 1200 mm
Wheel diameter 47.2 inch
Breaking force
Breaking force
Rotation speed
Speed control
Max. torque
Max. torque
Bead seating- Top-side inflation
Easymont pro
Wheel lift
Capability 70 kg
Power supply 230 VAC 1ph 50/60 Hz
Power supply (Amperage) A
Installed motor power
Dimensions LxWxH 1290/1350 x 2240 x 1850 mm
Dimensions LxWxH 50.8"/53.2" x 88.2" x 72.8"
Weight 820 Kg
Weight 1804 lbs