PRODUCT DESCRIPTION

• Effortless

• Fast in carrying out the job

• Automatic mounting/demounting tool

  • RECOMMENDED BY BMW

  • wdk certification

  • Mounting tool with integrated demounting finger replacing the conventional tyre lever

  • Automatic swing arm for reduced space requirement

  • Center-post clamping system

  • ESDB™ – Electronically synchronised dualdisc bead breaker for ergonomic operation

  • Inverter-controlled motor for 2 speeds for optimum results

  • Pneumatic bead press arm to protect the rims

  • Pneumatic Bead Depressor - PBD330 for easy demounting high performance tyres

  • BMW clamping kit

  • Laser pointer for accurate positioning of the mounting tool

  • Wheel lift for easy lifting of heavy wheels

  • For standard, low profile, UHP and runflat tyres

  • Mirror for lower bead view

  • Pneumatic bead assist device “easymont pro”

  • SCOPE OF DELIVERY:
    • Tyre changer monty® 8600 Platinum BMW in RAL 7016
    • Pneumatic bead press arm
    • Wheel lift (70 kg capacity)
    • BMW kit to clamp the wheel through stud holes
    • Smart Bead Spacer (mounting aid)
    • Bead clamp
    • Plastic rim protectors
    • Plastic inserts for demounting finger
    • 24-month warranty

Expand ▼
BMW_EN
File size : 1,775.81 Kb
Plastic rim protector
Plastic rim protector

clip-on type, to protect rim from scratches, set of 3

plastic tyre protector
Plastic tyre protector

clip-on type, to protect run-flat tyres when mounted onto steel rims, 1 off

Reverse-mounted wheel kit
Reverse-mounted wheel kit

with pins of Ø 24 mm

Plastic protectors 85 mm
Plastic protectors 85 mm

The kit contains 10 protectors

BMW clamping kit
BMW clamping kit

for standard and reverse mounted wheels, consisting of:
Cylindrical vertex pin L.110mm.
Tapered vertex pin L.110mm.
Reduction cone: onty 8600 only
Flange for studs BMW
Standard on monty 8600 BMW and for monty quadriga 1 BMW

Cone kit 42-85mm
Cone kit 42-85mm

consisting of 1 steel cone EAM0117G47A to centre steel / alloy wheels before clamping and 3 plastic protectors EAC0100G66A for use with alloy rims only

Bead clamp
Bead clamp

To facilitate mounting of the upper bead, especially on low profile and stiff tires

Smart bead spacer
Smart Bead Spacer

Holds the bead in 6 positions in the drop center during tire mounting operation. To be used in conjunction with the pneumatic bead assist

BMW CLAMPING KIT

kit BMW TC

The BMW tyre changer machines include a special clamping kit, dictated by BMW AG.
• Cylindrical vertex pin l.110mm
• Tapered vertex pin l.110mm
• Flange for BMW vehicles with stud pitch holes diameter of 5x112mm and 5x120mm
• Flange for MINI vehicle

CENTRE CLAMP

feat-centreclamp

The centre-clamp design has numerous benefits: most important is the drastically reduced risk of damage and that there are no restrictions of the turntables with clamping jaws, while automatic locking of the wheel provides fast, safe and correct clamping of the wheel.

ESDB™ (Electronic Sync Dual Bead-Breaker)

The unique dual-disc bead breaker with servo drive. Bead breaking in an upright position: faster, easier, ergonomic and effortless. The bead roller is applied to detach both soft and stiff beads.

M/D tool technology
Tower technology Automatic swing arm
Clamping System Automatic pilot hole
Tool vertical positioning
Jaw type
Rim diameter 12" - 30"
Outside clamping range
Inside clamping range
Max wheel width 381 mm
Max wheel width 15 inch
Max. Wheel diametre 1200 mm
Wheel diameter 47.2 inch
Breaking force 11,5 kN
Breaking force
Rotation speed 7-14 rpm
Speed control
Max. torque 1500 Nm
Max. torque 1106
Bead seating- Top-side inflation
Toolbox
Easymont pro
Wheel lift Standard
Capability 70 kg
Power supply 230 VAC 1ph 50/60 Hz
Power supply (Amperage) A
Installed motor power
Dimensions LxWxH 1700 x 1500 x 2260 mm
Dimensions LxWxH 66.9" x 59.1" x 89"
Weight 430 Kg
Weight 946 lbs