PRODUCT DESCRIPTION

The wheel balancer with diagnostic functions for tyre shops, garages and car dealerships with high tyre service volume. With touchscreen monitor, non-contact data entry and diagnostic functions. Unbalance measurement and run-out diagnosis are performed in a single fast measuring run. The integrated wheel lift automatically lifts a wheel to the last preset height.

  • BW4030 – the ultimate wheel lift for wheel balancers, integrated in the cabinet, operated by the balancer's logic, automatically lifting a wheel of the same set to the correct height and consequently improving centring and clamping of the wheel

  • High-productivity wheel balancer

  • Rim scanner for
    - automatic non-contact rim profiling
    - automatic selection of balancing mode and weight position
    - automatic acquisition of rim diameter and offset

  • Smart Sonar for automatic non-contact acquisition of rim width

  • Run-out diagnosis combined with unbalance measurement in a single fast measuring run

  • Recommendation for match-mounting, when possible, to reduce vibrations caused by radial run-out

  • Touchscreen monitor with graphical user interface PLATINUM – fast and very intuitive

  • easyWeight: fast pinpoint bottom weight placement. Pinpoint laser light indicator to accurately position adhesive weights on the wheel

  • Alternative positioning of adhesive weights with the geodata® gauge arm

  • Semi-automatic selection of balancing mode with easyAlu in combination with the geodata gauge arm

  • Torque-controlled Power Clamp device – fast and accurate clamping of the wheel

  • Stop-in-Position feature where the operator only has to touch the amount of unbalance on the screen and the wheel is automatically indexed to correction position

  • QuickBal for reduced measurement time:
    Short start-stop cycle time: 4.5 seconds (15’’ rim)

  • VPM measurement technique for uncompromised accuracy

  • Telescopic wheel guard – requiring no additional back space

  • New ergonomic weight tray

  • Rim lighting to facilitate application of the geodata gauge arm

  • Imbalance minimisation and optimisation programs

  • High capacity, wheels up to 42” of diameter and 70 kg of weight

  • Networking capability with the optional networking software

  • Compatible with asanetwork

  • Print-out with optional printer

Expand ▼
Product name
geodyna® 8200-2P

The wheel balancer with diagnostic functions for tyre shops, garages and car dealerships with high tyre service volume. With touchscreen monitor and automatic non-contact data entry. Unbalance measurement and run-out diagnosis are performed in a single fast measuring run.

Hofmann geodyna Wheel Balancers HD
geodyna® 8250 - Balancing tutorial
WB Premium_GB
File size : 2,754.17 Kb
9702800_geodyna 7850p_8250p_GB
File size : 1,092.75 Kb
Clamping plate
Clamping plate

Ø 200 mm

Centring cone for light-truck wheels
Centring cone for light truck wheels

Ø 113-170 mm, to be used in conjunction with spacer ring

Centring cone for light-truck wheels
Centring cone for light truck wheels

Ø 195-214 mm, to be used in conjunction with spacer ring

Kit for light truck wheels
Kit for light truck wheels

spacer and cone 113-170 mm

Light truck kit
Light truck kit

Spacer and cone 122-172 mm

Plastic spacer ring for light truck wheels
Plastic spacer ring for light truck wheels

to be clamped with centring cones or with a studhole flange plate

Set of 9 low-taper centring collets
low-taper centring collets

set of 9 - 52.5-122 mm / 2"- 4.8"

Universal adaptor SCA
Universal adaptor SCA

for closed 3-, 4-, 5-stud rims; pitch circles of Ø 95-215 mm are infinitely and centrally adjustable.

asanetwork

asanetwork

It is a tool that allows equipment to be connected to a garage.
With the asanetwork all relevant information are made available at every workstation in the shop as all machines are connected to the commercial software.

easyWEIGHT™

feat-easyweight

Pinpoint laser identifies exact weight placement location for increased accuracy and efficiency.

easyALU™

feat-geotouch geodata

Touch the rim with the geodata™ arm to enter the rim dimensions.

Match-mounting

feat-matchmounting

Radial run-out diagnosis of the wheel is performed during unbalance measurement, hence without compromising on productivity. High run-out is automatically detected during rim diagnosis, providing match-mounting.

Oversize shaft

feat-oversizeshaft

The 225 mm length allows the use of stud-hole flanges and other accessories for almost every type of rim.

WHEEL LIFT

feat-wheellift

The ultimate wheel lift for an easy and fast handling of wheels up to 70 kg. The wheel is automatically raised to the last centring height and the platform automatically returns to rest position, thus reducing floor-to-floor cycle time.

PLATINUM user interface

feat-platinumuserinterface

Highly intuitive and fast touch-screen monitor with large digits, coloured weight position indicators and PLATINUM user interface – improved intuitiveness and ergonomics.

QuickBAL™

feat-quickbal

30% reduced cycle time, less than 4,5 seconds, maintaining the same high accuracy.

Power Clamp™

feat-power-clamp

Patented automatic Power Clamp™ electromechanical clamps the wheel accurately with a constant force, reducing the opportunity for chasing weight.

VPM technique

VPM technique

Measurement system for high precision and repeatability.

Smart Sonar™

Smart Sonar™

Automatic, non-contact rim width acquisition delivers greater accuracy and ease of use for a 30% savings in complete process when compared to manual operation.

Motorized Yes
Wheel clamping Power Clamp
Diametre of shaft 40 mm
Measuring speed < 200 rpm
Balancing accuracy 0.035 oz
Balancing accuracy 1 g
Angular resolution ± 0,35°
Lenght of shaft 225 mm
Lenght of shaft 8.86 inch
Start/Stop balance time - Check spin 4.5 s
Rim diameter range 8" - 32"
Offset range 1" - 20"
Rim width range 1" - 20"
Max. wheel diameter 1050 mm
Max wheel diameter 42 inch
Max. wheel weight 70 kg
Max. wheel weight 154 lbs
Input power (amperage) 4 A
Input power (VAC) 230 VAC 1ph 50/60 Hz
Dimensions LxWxH 1940 x 1020 x 1570 mm
Dimensions LxWxH 76.4" x 40.2" x 61.8"
Weight 195 kg
Net weight lbs