PRODUCT DESCRIPTION

The wheel balancer for tyre shops, car dealerships and garages with medium tyre service volume: with the easyWeight pinpoint indicator light – an accurate, fast and easy solution to position adhesive weights on the wheel

  • With torque-controlled Power Clamp device instead of quick nut

  • Intuitive dual 3-digit LED display for the amount readings and bright weight position indicators – in ergonomic raised position

  • easyWeight: Pinpoint laser light indicator to accurately and conveniently position adhesive weights on the wheel.

  • Semi-automatic input of offset and rim diameter via 2D SAPE and automatic rim width acquisition via Smart Sonar – fast and easy

  • Semi-automatic pre-selection of balancing mode via easyAlu

  • Imbalance minimisation and optimisation programs

  • VPM measurement technique for uncompromised accuracy

  • QuickBal for reduced measurement time: Short start-stop cycle time: 4.5 seconds (15" rim)

  • New ergonomic weight tray

Expand ▼
Catalogo MB-HF EN
File size : 2,434.91 Kb
Clamping plate
Clamping plate

Ø 200 mm

Centring cone for light-truck wheels
Centring cone for light truck wheels

Ø 113-170 mm, to be used in conjunction with spacer ring

Centring cone for light-truck wheels
Centring cone for light truck wheels

Ø 195-214 mm, to be used in conjunction with spacer ring

Kit for light truck wheels
Kit for light truck wheels

spacer and cone 113-170 mm

Light truck kit
Light truck kit

Spacer and cone 122-172 mm

Plastic spacer ring for light truck wheels
Plastic spacer ring for light truck wheels

to be clamped with centring cones or with a studhole flange plate

Set of 9 low-taper centring collets
low-taper centring collets

set of 9 - 52.5-122 mm / 2"- 4.8"

Centring Set
Centring Set

For light trucks MB Sprinter and VW Crafter, series 400/ 46
pitch circle diameter 6 x 205 mm

easyWEIGHT™

feat-easyweight

Pinpoint laser identifies exact weight placement location for increased accuracy and efficiency.

Ergonomic display

feat-ergonomicdispaly

The raised display increases ergonomic handling.

Gauge arm

feat-gaugearm

Semi-automatic data entry and positioning of adhesive weights.

Split weight mode

feat-splitweightmode

Hides adhesive weights behind two adjacent spokes so they cannot be seen from the outside.

Oversize shaft

feat-oversizeshaft

The 225 mm length allows the use of stud-hole flanges and other accessories for almost every type of rim.

easyALU™

feat-easyalu

Touch the rim with the gauge arm to enter the rim dimensions and automatically select the weight balancing mode.

Power Clamp™

feat-power-clamp

Patented automatic Power Clamp™ electromechanical clamps the wheel accurately with a constant force, reducing the opportunity for chasing weight.

QuickBAL™

feat-quickbal

30% reduced cycle time, less than 4,5 seconds, maintaining the same high accuracy.

Smart Sonar™

feat-smart-sonar

Automatic, non-contact rim width acquisition delivers greater accuracy and ease of use for a 30% savings in complete process when compared to manual operation.

VPM technique

feat-vpm-technique

Measurement system for high precision and repeatability.

Motorized Yes
Wheel clamping Power Clamp
Diametre of shaft 40 mm
Measuring speed < 200 rpm
Balancing accuracy 0.035 oz
Balancing accuracy 1 g
Angular resolution ± 0,35°
Lenght of shaft 225 mm
Lenght of shaft 8.86 inch
Start/Stop balance time - Check spin 4.5 s
Rim diameter range 8" - 32"
Offset range 1" - 20"
Rim width range 1" - 20"
Max. wheel diameter 1050 mm
Max wheel diameter 42 inch
Max. wheel weight 70 kg
Max. wheel weight 154 lbs
Input power (amperage) 1.1 A
Input power (VAC) 230 VAC 1ph 50/60 Hz
Dimensions LxWxH 1383 x 878 x 1834
Dimensions LxWxH 54.5" x 34.6" x 77.2"
Weight 115 kg
Net weight lbs