PRODUCT DESCRIPTION

The geodyna® 4800-2L measures both the static and the dynamic portions of unbalance and consequently increases truck wheel life considerably. This balancer is also equipped with TFT flat screen and asanetwork capability.

  • Automatic input of offset and rim diameter (2D SAPE)

  • Input of rim width via capacitive keypad

  • Electronic friction brake to retain the wheel in any position

  • Patented virtual plane measurement (VPM) technique

  • Weight tray with 27 weight compartments and shelves for car cones and weight pliers

  • Measuring speed less than 100 rpm

  • Automatic braking of the wheel after measurement

  • Automatic static and dynamic unbalance measurement in a single measuring run

  • Cone adaptor with spacer and light-truck cone of 120 – 170 mm diameter

  • Gauge arm with patented wheel weight clamp to input wheel data and position adhesive weights

  • Hidden weight mode

  • Patented optimisation mode

  • 19“ TFT wide-screen monitor

  • Comprehensive on-line help in more than 25 languages

  • asanetwork capability

Expand ▼
Hofmann geodyna Wheel Balancers HD
geodyna® 980L / 4800-2L
File size : 2,337.65 Kb
Clamping plate
Clamping plate

Ø 200 mm

Centring cone for light-truck wheels
Centring cone for light truck wheels

Ø 113-170 mm, to be used in conjunction with spacer ring

Centring cone for light-truck wheels
Centring cone for light truck wheels

Ø 195-214 mm, to be used in conjunction with spacer ring

Light truck kit
Light truck kit

Spacer and cone 122-172 mm

Plastic spacer ring for light truck wheels
Plastic spacer ring for light truck wheels

to be clamped with centring cones or with a studhole flange plate

Set of 9 low-taper centring collets
low-taper centring collets

set of 9 - 52.5-122 mm / 2"- 4.8"

Centring Set
Centring Set

For light trucks MB Sprinter and VW Crafter, series 400/ 46
pitch circle diameter 6 x 205 mm

Universal adaptor SCA
Universal adaptor SCA

for closed 3-, 4-, 5-stud rims; pitch circles of Ø 95-215 mm are infinitely and centrally adjustable.

Pneumatic loading device

feat-pneumativloadingdevice

QuickBAL™

feat-quickbal

30% reduced cycle time, less than 4,5 seconds, maintaining the same high accuracy.

VPM technique

feat-vpm-technique

Measurement system for high precision and repeatability.

Motorized
Wheel clamping
Diametre of shaft 40 mm
Measuring speed < 100 rpm
Balancing accuracy
Balancing accuracy 1
Angular resolution
Lenght of shaft 40 mm
Rim diameter range 8 - 26
Offset range
Rim width range 2 - 20
Max. wheel diameter 1300 mm
Max wheel diameter inch
Max. wheel weight 250 kg
Input power (VAC) 230 VAC 1ph 50/60 Hz
Dimensions LxWxH 1370 x 1455 x 2005
Dimensions LxWxH
Weight 238 kg
Net weight lbs