PRODUCT DESCRIPTION

The duolift® HL 4500 TALL has been designed to be in the position to lift cars from the smallest size up to medium size vans with super high roof

  • Flexible installation: the lift is available in 2 versions that can be installed in 2 different heights each at the time of the installation

  • Versymmetric® Technology: It combines the advantages of an asymmetric and a symmetric lift and improves the ergonomics when placing the arms to lift the car

  • Large swing range with 3-stage front and 3-stage rear arms

  • Controls are positioned in an ergonomic place on the primary column with clear indications of each push button

  • Power Pack is mounted high thus offering reduced noise performance

  • Shut-off bar: prevents cars to be damaged

  • Comfort lowering: the lift will automatically go up a little bit to release the carriage from the safety lock and will then automatically lower the vehicle 

  • CE stop technology instead of mechanical foot guards

  • The 3 Stage arms allows always perfect access to the pick up points of every vehicle

  • A rubber protection on the carriage ensures that there are no damages to the car door

  • Optional remote control box to be mounted on the secondary column 

Expand ▼
duolift® HL 4500 STD

The duolift® HL 4500 STD has been designed to be in the position to lift cars from the smallest size up to medium size vans with standard roof

Hofmann_LIFTS_EN
File size : 1,152.90 Kb

3 Stage Arms

feat-3stagearms

Front and rear 3 stage arms always allow a perfect access to the pick up points of the vehicle.

CARRIAGE AND ARMS

feat-carriageandarms

Very rugged design with integrated grease fitting and optimum door clearance when the car is placed on the lift. (Picture shows lift in wide installation)

Comfort lowering

feat-comfortlowering

Vehicle is lowered by simply pushing the lowering button. No need to activate the UP button to release the arms from the lock position.

Controls

feat-controls

Positioned in an ergonomic place on the primary column with clear indications of each push button.

Safety lock

feat-safetylock

Electric safety lock mechanism active during the complete lifting process is automatically released when lowering the lift thanks to the “Comfort Lowering” feature.

Versymmetric®

feat-versymmetric

It combines the advantages of an asymmetric and a symmetric lift and improves the ergonomics when placing the arms to lift the car.

Capacity 4500 Kg
Capacity lbs
Lifting times 30 s
Lowering times (under nominal load) 30 s
Lowering times s
Lifting height inch
Lifting height 1965 mm
Maximum pad height from floor mm
Maximum pad height from floor inch
Drive-through width inch
Drive-through width 2.380 mm
Motor 4
Power supply 400-415 VAC 3ph 50 Hz
Distance between columns mm
Distance between columns inch
Short arm extraction 570 – 1.050 mm
Short arm extraction inch
Long arm extraction 950 – 1.650 mm
Long arm extraction inch
Minimum ceiling height 4.650 mm
Minimum ceiling height inch
Minimum concrete thickness mm
Minimum concrete thickness inch