The standard lift with base frame is designed for garages and tyre shops to lift vehicles up to 2.5 t.
With base frame
Asymmetrical design, car door access on two sides
Automatic arm locks
Low pick-up height
Electro-mechanical drive
Rugged long-life column profile
Rolled-thread lifting spindles
4 pick-up pads vertically adjustable from approximately 105 - 165 mm, 120 mm diameter
Automatic lubrication system
| Capacity | 2500 Kg |
| Capacity | lbs |
| Lifting times | 45 s |
| Lowering times (under nominal load) | s |
| Lowering times | s |
| Lifting height | inch |
| Lifting height | 1965 mm |
| Maximum pad height from floor | 105–165 mm mm |
| Maximum pad height from floor | inch |
| Drive-through width | inch |
| Drive-through width | 2560 mm |
| Motor | 1 x 3 kW |
| Power supply | 400-415 VAC 3ph 50 Hz |
| Distance between columns | mm |
| Distance between columns | inch |
| Short arm extraction | 600 - 1050 mm |
| Short arm extraction | inch |
| Long arm extraction | 835 - 1285 mm |
| Long arm extraction | inch |
| Minimum ceiling height | mm |
| Minimum ceiling height | inch |
| Minimum concrete thickness | 300 mm |
| Minimum concrete thickness | inch |
| Weight | 680 Kg |
Hofmann is a trademark, registered in the United States and other countries, of Snap-on Incorporated.
All rights reserved.
