This lift is designed for garages and tyre shops to lift cars, vans and light trucks up to 3.2 t.
With crossbeam
Without base frame - for perfect ground clearance
Asymmetrical design, car door access on two sides
Automatic arm locks
Electro-mechanical drive via two motors
Specially rolled column profile
Rolled-thread lifting spindles
4 pick-up pads vertically adjustable from approximately 125 - 195 mm, 120 mm diameter
Automatic lubrication system
| Capacity | 3200 Kg |
| Capacity | lbs |
| Lifting times | 45 s |
| Lowering times (under nominal load) | s |
| Lowering times | s |
| Lifting height | inch |
| Lifting height | 1925 mm |
| Maximum pad height from floor | 125–195 mm |
| Maximum pad height from floor | inch |
| Drive-through width | inch |
| Drive-through width | 2510 mm |
| Motor | 2 x 2 kW |
| Power supply | 400-415 VAC 3ph 50 Hz |
| Distance between columns | mm |
| Distance between columns | inch |
| Short arm extraction | 620 - 1046 mm |
| Short arm extraction | inch |
| Long arm extraction | 788 - 1380 mm |
| Long arm extraction | inch |
| Minimum ceiling height | 4400 mm |
| Minimum ceiling height | inch |
| Minimum concrete thickness | 250 mm |
| Minimum concrete thickness | inch |
| Weight | 700 Kg |
Hofmann is a trademark, registered in the United States and other countries, of Snap-on Incorporated.
All rights reserved.
