Brake tester

Analogue display, double scale: indicating range 0-8 kN, one-part galvanised roller set, idling speed 5.4 km/h, motor power 2 x 3.7 kW, power supply 3/N/PE 400 V AC / 50 Hz, including ASA Livestream

safelane® 204-RP is the first test lane of our new testing generation. Thanks to the modular design the equipment is always configured starting from the brake tester and can be customised depending on the customer’s individual requirements.

safelane® 306-RP  is part of our new test lane generation. The new generation includes latest state-of-the-art technology to meet current and future requirements. The traditional differentiation between brake tester and test lane has been abandoned. Thanks to the modular design the equipment is always configured starting from the brake tester and can be customised depending on the customer’s individual requirements.

Indicating range 0-8 / 0-40 kN; two-part galvanised roller set, rollers with wear-proof plastic coating on welded expanded metal mesh or alternatively in SmoothGrip version, elevated rear rollers: 50 mm, motors located under the rollers

Low installation depth, indicating range 0-8 / 0-40 kN; two-part galvanised roller set, rollers with wear-proof plastic coating on welded expanded metal mesh or alternatively in SmoothGrip version, elevated rear rollers: 50 mm, motors at drive-off side

Indicating range 0-8 / 0-40 kN; two-part galvanised roller set, rollers with wear-proof plastic coating on welded expanded metal mesh or alternatively in SmoothGrip version, elevated rear rollers: 50 mm, motors located under the rollers

Low installation depth, indicating range 0-6 / 0-30 kN; two-part galvanised roller set, rollers with wear-proof plastic coating on welded expanded metal mesh or alternatively in SmoothGrip version, elevated rear rollers: 30 mm, motors at drive-off side

Indicting range 0-6 / 0-30 kN; two-part galvanised roller set, rollers with wear-proof plastic coating on welded expanded metal mesh or alternatively in SmoothGrip version, elevated rear rollers: 30 mm, motors located under the rollers

Indicating range 0-6 / 0-30 kN; set of drive-on and drive-off ramps, simple and time saving installation, no foundation work necessary, low drive-over height, roller set in flat design, rollers with wear-proof plastic coating on welded expanded metal mesh, level rollers, motors located at the side of the rollers

Control cabinet (E box), software, galvanised roller set, idling speed approx. 5.5 km/h, drive rating 2.5 kW, power supply 400 V / 50 Hz