PRODUCT DESCRIPTION

Hofmann® Scissor Alignment Lifts are easy to operate, provide increased accessibility to alignment adjustment areas and are easy to load. Space saving design allows for up to five scissor lifts to fit into the same operating space as four 4-post lifts.

  • Part Number:  EELR788APKG

  • Additional Features

    • Maintenance reduced rear slip plates use oversized, encapsulated bearings that roll upward to protect against environment debris
    • Four hydraulic cylinders in a cross aligned arrangement provide secure lifting power and added safety
    • Approach ramps are equipped with end sliders to minimize noise and reduce floor damage
    • Adjustable maximum lift height suits locations with low ceilings
    • Safety systems include:
      - Mechanical locking with pneumatic safety lock release from the control console
      - Flow sensing valves within the hydraulic control circuit
      - Redundant hydraulic safety system with cross aligned hydraulic circuits
    • On-board Filter/Regulator/Lubricator (FRL) provides clean and lubricated air to help reduce maintenance and protect pneumatic systems
    • All models have been tested and validated by an independent third party to the ANSI/ALI automotive lift standard, ALCTV-2011
Expand ▼
14k Scissor

Hofmann® Scissor Alignment Lifts are easy to operate, provide increased accessibility to alignment adjustment areas and are easy to load. Space saving design allows for up to five scissor lifts to fit into the same operating space as four 4-post lifts.

Locked and Lighted models provide productivity enhancements while allowing the technician to perform critical tasks while minimizing alignment process operations, by illuminating both inspection and adjustment areas and by sequencing the locking of alignment plates.

14k Lock & Lighted Flush Mount

Hofmann® Scissor Alignment Lifts are easy to operate, provide increased accessibility to alignment adjustment areas and are easy to load. Space saving design allows for up to five scissor lifts to fit into the same operating space as four 4-post lifts.

Locked and Lighted models provide productivity enhancements while allowing the technician to perform critical tasks while minimizing alignment process operations, by illuminating both inspection and adjustment areas and by sequencing the locking of alignment plates.

14k Standard

Hofmann® Scissor Alignment Lifts are easy to operate, provide increased accessibility to alignment adjustment areas and are easy to load. Space saving design allows for up to five scissor lifts to fit into the same operating space as four 4-post lifts.

14k Scissor Alignment Lift
File size : 347.19 Kb
DOWNLOAD
14k Scissor Alignment Lift DOWNLOAD
Capacity 6350 Kg
Capacity 14000 lbs
Lifting times 80 s
Lowering times s
Lifting height inch
Lifting height mm
Maximum pad height from floor mm
Maximum pad height from floor inch
Drive-through width inch
Drive-through width mm
Motor
Motor Hp
Power supply 230 VAC 1Ph 50/60 Hz
Distance between columns mm
Distance between columns inch
Short arm extraction mm
Short arm extraction inch
Long arm extraction mm
Long arm extraction inch
Minimum ceiling height mm
Minimum ceiling height inch
Minimum concrete thickness mm
Minimum concrete thickness inch
Weight 6007 lbs
Width Between Runways 38 inch
4 Wheel Alignment Wheelbase 88 - 155 inch
2 Wheel Alignment Wheelbase 180 inch
Console Dimensions DxWxH 16.5 x 14.125 x 45.755 inch
Air Supply Requirements 90 - 120 Psi
Front Accessibility open
Overall Length 270 inch
Service Wheelbase 194 inch
Overall Width 92.5 inch
Column Height inch
Column Width inch
Column Depth inch
Height of Lifting Fork inch
Length of Fork inch
Lifting Capacity Per Column lbs
Lifting Speed 80 s
Load Capacity Per Set of Four Columns lbs
Load Capacity Per Set of Six Columns lbs
Lowered Wheel Fork Height inch
Lowering Speed s
Runway Width 26 inch
Weight per Column lbs
Width of Lifting Fork inch