Ford Balancer Tooling Kit

Part Number:  EAK0221J97C

Includes the following:


V202-400-06 RevB.png V202-400-06
CenTor™ Plate
4x98mm, 4x100mm, 4x108mm, 6x135mm, 6x139.7mm, 8x165.1mm, 8x170mm

V202-400-07  RevB.png V202-400-07
CenTor™ Plate
5x108mm, 5x112mm, 5x114.3mm, 5x135mm, 5x139.7mm, 5x160mm, 6x180mm

E162-400-43  RevE.png E162-400-43
Low Taper Collet #2
Side A: 62mm - 67mm
Side B: 65.5mm - 70.5mm

E162-400-44  RevE.png E162-400-44
Low Taper Collet #3
Side A: 69mm - 74mm
Side B: 72.5mm - 77.5mm

E162-400-46  RevE.png E162-400-46
Low Taper Collet #5
Side A: 85.5mm - 90.5mm
Side B: 90mm - 95mm

V275-080-11  RevC.png V275-080-11 (8 PCS)
CenTor™ Stud
Style B - Wide Cone
Head Ø 28mm
Length 24.5mm
Total Length 99.5mm

V275-095-15  RevC.png V275-095-15 (8 PCS)
CenTor™ Stud
Style E - Narrow
Head Ø 19mm
Length 80mm
Total Length 114.5mm

V168-400-05  RevD.png

V168-400-05
Centering Disc #13
Side A: 8x6.5", 125mm Center Bore
Side B: 8x170mm, 125mm Center Bore

 

Used in combination with CenTor Plate V202-400-06 & CenTor Studs V270-080-11