The wheel balancer with Power Clamp Device and easyWEIGHT™ pinpoint laser light indicator for tyre shops, car dealerships and garages with medium tyre service volume.

With geoTOUCH™ - the touch-screen graphical display – the VAS 741 055 is as intuitive as a video balancer.


  • With torque-controlled Power Clamp device instead of quick nut
  • easyWEIGHT™: the pinpoint laser light indicator to accurately and conveniently position adhesive weights
  • Stop-in-Position feature where the operator only has to touch the amount of unbalance on the display and the wheel is indexed to correction position
  • geoTOUCH™ - the touchscreen graphical display, 10” wide, with DIAMOND user interface – makes VAS 741 055 as intuitive as a video balancer
  • Semi-automatic input of offset and rim diameter via 2D SAPE
  • Automatic rim width acquisition via Smart Sonar™ – fast and easy
  • Semi-automatic pre-selection of balancing mode via easyALU™
  • Split weight mode
  • Weight minimisation and optimisation
  • Two users with rapid switch function
  • Network printing capability – Compatible with asanetwork
  • WI-FI connectivity
  • VPM measurement technique for uncompromised accuracy
  • QuickBAL™ for reduced measurement time: Short start-stop cycle time: 4.5 seconds (15” rim)
Expand ▼



Pinpoint laser identifies exact weight placement location for increased accuracy and efficiency.

Gauge arm


Semi-automatic data entry and positioning of adhesive weights.

Oversize shaft


The 225 mm length allows the use of stud-hole flanges and other accessories for almost every type of rim.

Split weight mode


Hides adhesive weights behind two adjacent spokes so they cannot be seen from the outside.

VPM technique


Measurement system for high precision and repeatability.

Stop in position


Touch the screen to automatically rotate the wheel to weight application position.

Power Clamp™


Patented automatic Power Clamp™ electromechanical clamps the wheel accurately with a constant force, reducing the opportunity for chasing weight.

Smart Sonar™


Automatic, non-contact rim width acquisition delivers greater accuracy and ease of use for a 30% savings in complete process when compared to manual operation.



30% reduced cycle time, less than 4,5 seconds, maintaining the same high accuracy.



Touch the rim with the gauge arm to enter the rim dimensions and automatically select the weight balancing mode.

Multiple users


Two operators can operate with the balancer simultaneously and quickly recall their rim dimensions.

Motorized Yes
Wheel clamping Power Clamp
Diameter of shaft 40 mm
Measuring speed < 200rpm
Balancing accuracy 1g
Angular resolution ± 0.35°
Length of shaft 225mm
Start/Stop balance time - Check spin 4s
Rim diameter range 8in-32in
Offset range 1in-20in
Rim width range 1in-20in
Max. wheel diameter 1050mm
Max. wheel weight 70kg
Input power (amperage) 1.1A
Input power (VAC) 230 VAC 1ph 50/60 Hz


*Snap-on reserves the right to make changes to specifications without notice and without making changes retroactively.

Wheel clamping
Diametre of shaft
Measuring speed
Balancing accuracy
Balancing accuracy
Angular resolution
Rim diameter range
Offset range
Rim width range
Max. wheel diameter mm
Max wheel diameter inch
Input power (VAC)
Dimensions LxWxH
Dimensions LxWxH
Weight kg
Net weight lbs