PRODUCT DESCRIPTION

The tyre changer for the use in high-volume tyre shops and car dealerships - conventional solutions combined with innovative centre-clamp system - for wheels up to 44“.

Features:

  • RECOMMENDED BY VOLKSWAGEN
  • Certified by wdk
  • Conventional mounting head plus tyre lever and onside pedal-operated bead breaker blade
  • Electro-mechanical centre-clamp flange
  • Automatic speed control by inverter that maximises speed depending on the torque applied
    • First speed as low as 7 rpm for critical tasks
    • Second speed automatically adjusted to between 7 and 20 rpm depending on the torque applied
  • Pneumatic tilt-back tower
  • Pneumatic bead assist to aid in safe use
  • Top-side bead seating and inflating kit
  • Wheel lift
  • Designed for maximum wheel diameter of 44”, maximum rim width of 14” and maximum tyre width of 15”
  • In addition to standard mounting head the VAG mounting head for rims with protruding spokes and a quick exchange device (not wdk certified)
  • Finish in RAL 7040
Expand ▼

BEAD BRAKER BLADE

feat-beadbreakerblade

Owing to its special shape the bead breaker blade handles rims most gently and facilitates operation considerably.

BEAD PUSHER

feat-beadpusher

Puts the bead in the drop centre for a gentle mounting and demounting.

CENTRE CLAMP

feat-centreclamp

The centre-clamp design has numerous benefits: most important is the drastically reduced risk of damage and that there are no restrictions of the turntables with clamping jaws, while automatic locking of the wheel provides fast, safe and correct clamping of the wheel.

smartSpeed

feat-smartspeed

The innovative technology – patent-protected – that optimises the torque applied to the wheel and automatically sets the maximum rotation speed of the wheel accordingly.

PLUS CONFIGURATION

feat-plusconfiguration

The plus models are certified by wdk. They come standard with easymont® pro and plus kit that enable the correct mounting and demounting of UHP and run-flat tyres.

PNEUMATIC VERTICAL ARM

feat-pneumaticverticalarm

Fast and ergonomic: the pneumatic vertical arm facilitates positioning of the mounting head on all wheels.

CONVENTIONAL MOUNTING HEAD

feat-conventionalmountinghead

The mounting head with tyre lever and the on-side bead breaker are a favourite choice of operators, combining familiar design with fast operation.

GP models

feat-gpmodels

A direct burst of compressed air facilitates bead seating. The GP models offer a top-side bead seater with a 24-litre tank.

OPTIONAL QUICK-EXCHANGE DEVICE WITH PLASTIC HEAD

feat-optionalquickexchangedevicewithplasticmountinghead

Owing to the quick exchange device, steel and plastic mounting heads can be quickly swapped over

M/D tool technology M/D tool & bead lever
Tower technology Pneumatic tilt back
Clamping System Automatic pilot hole
Tool vertical positioning Pneumatic
Max wheel width 381mm
Max. Wheel diameter 1120mm
Breaking force 12 kN
Rotation speed CW 7 - 18 rpm CCW 7 rpm
Speed control PROspeed
Max. torque 1200 Nm
Wheel lift Standard
Capability 70kg
Power supply (amperage) 17A
Installed motor power 0.9 kW
Dimensions LxWxH 1850 x 1960 x 2270
Net weight 485Kg

 

*Snap-on reserves the right to make changes to specifications without notice and without making changes retroactively.

M/D tool technology
Tower technology
Clamping System
Tool vertical positioning
Jaw type
Clamping range
Outside clamping range
Inside clamping range
Max wheel width mm
Max wheel width inch
Max. Wheel diametre mm
Wheel diameter inch
Breaking force
Breaking force
Rotation speed
Speed control
Max. torque
Max. torque
Bead seating- Top-side inflation
Toolbox
Easymont pro
Wheel lift
Capability 70 kg
Power supply
Power supply (Amperage) A
Installed motor power
Dimensions LxWxH
Dimensions LxWxH