PRODUCT DESCRIPTION

The wheel balancer for tire shops, car dealerships and garages with medium to high tire service volume: with touchscreen monitor and easyWEIGHT pinpoint indicator light – An accurate, fast and easy solution to position adhesive weights on the wheel.

  • Part Number:  EEWB765AP

  • Intuitive User Interface - New touchscreen, user-friendly interface on a flat panel, resistive touch display. Fast and intuitive selection of the cycle modes.

  • easyWEIGHT - Pinpoint indicator light - the accurate, fast and easy solution to position adhesive weight on the wheel.

  • Power Clamp - The electromechanical power clamp always clamps the wheel accurately with a constant force, which is most important for every balancing operation.

  • Data Entry - The Smart Sonar automatically detects rim width and the measuring run is started as soon as the wheel guard has been completely lowered. 30% time savings compared to manual input.

  • VPM Measurement Technique - The geodyna® 7600 series comes with the patented Virtual Plane Measurement (VPM) technique which ensures accurate balancing results, while being insensitive to ambient conditions

Expand ▼
geodyna® 7600p Brochure
File size : 1,128.04 Kb
Wheel Balancer Accessory Catalog
File size : 7,190.30 Kb
Wheel Balancer Selector
File size : 392.35 Kb

asanetwork

feat-asanetwork

A tool that allows equipment to be connected to a garage. With the asanetwork all relevant information are made available at every workstation in the shop as all machines are connected to the commercial software.

Smart Sonar™

feat-smart-sonar

Automatic, non-contact rim width acquisition delivers greater accuracy and ease of use for a 30% savings in complete process when compared to manual operation.

Rim lighting

feat-rim-lighting

Facilitates application of the geodata gauge arm.

Stop In Position

feat-stopinposition

Touch the screen to automatically rotate the wheel to weight application position.

Power Clamp™

feat-power-clamp

Patented automatic Power Clamp electromechanical clamps the wheel accurately with a constant force, reducing the opportunity for chasing weight.

easyWEIGHT™

feat-easyweight

Pinpoint laser identifies exact weight placement location for increased accuracy and efficiency.

easyALU™

feat-easyalu

Touch the rim with the gauge arm to enter the rim dimensions and automatically select the weight balancing mode.

Split weight mode

feat-splitweightmode

Hides adhesive weights behind two adjacent spokes so they cannot be seen from the outside.

QuickBAL™

feat-quickbal

30% reduced cycle time, less than 4,5 seconds, maintaining the same high accuracy.

Oversize Shaft

feat-oversizeshaft

The 225 mm length allows the use of stud-hole flanges and other accessories for almost every type of rim.

VPM Technique

feat-vpm-technique

Measurement system for high precision and repeatability.

Tech features
Wheel clamping Power clamp
Diameter of shaft 40 mm
Measuring speed < 200 rpm
Balancing accuracy 0.035 oz (1 g)
Angular resolution ± 0,35°
Length of shaft 225 mm
Start/Stop balance time - Check spin (Wheel 195/65R15) 4.5 s
Manual rim diameter range  8" - 32"
Manual offset range  1" - 20"
Manual rim width range  1" - 20"
Semi-automatic rim diameter range  8" - 25"
Semi-automatic rim width range  3" - 15"
Max. wheel diameter 42" 
Max. wheel weight 154 lbs (70 kg)
Motorized Yes
Power Requirements 115 VAC 1ph 50/60 Hz 
Dimensions LxWxH (Unit only) 54.4" x 34.5" x 72.2"
Net Weight 253 lbs (115 kg)