Hofmann Scissor Alignment Lifts are easy to operate, provide increased accessibility to alignment adjustment areas and are easy to load. Space-saving design allows for up to five scissor lifts to fit into the same operating space as four 4-post lifts.

Locked and Lighted models provide productivity enhancements while allowing the technician to perform critical tasks while minimizing alignment process operations, by illuminating both inspection and adjustment areas and by sequencing the locking of alignment plates.

  • Features:

    • Maintenance reduced rear slip plates use oversized, encapsulated bearings that roll upward to protect against environment debris
    • Four hydraulic cylinders in a cross aligned arrangement provide secure lifting power and added safety
    • Approach ramps are equipped with end sliders to minimize noise and reduce floor damage
    • Adjustable maximum lift height suits locations with low ceilings
    • On-board Filter/Regulator/Lubricator (FRL) provides clean and lubricated air to help reduce maintenance and protect pneumatic systems


  • Safety Systems Include:

    • Mechanical locking with pneumatic safety lock release from the control console
    • Flow sensing valves within the hydraulic control circuit
    • Redundant hydraulic safety system with cross aligned hydraulic circuits


  • Locked & Lighted Models:

    • Illuminate alignment adjustment and calibration areas
    • Front LEDs are mounted in the front turnplate base to easily accommodate varying vehicle wheel tracks
    • Rear LEDs are strategically positioned on the rear slip plates
    • Ease locking control activation from the lift console to reduce walking and effort from resetting alignment pins in plates
    • Locking components made from corrosion-resistant material


  • True Task Lighting System on Locked & Lighted Models:

    • Patented auto on/off light feature ensures no power when operating in the hazard zone
    • Patented light mounting position optimizes viewing angle, illuminating key inspection and adjustment areas
    • Approved for use in Class 1 Division 1 environments for both surface and flush mount models


  • Adjustable Air-Hydraulic Jack Beam:

    • Our new jack beam is designed with extended-reach lifting arms, higher lifting stroke, and low drive-over height
    • This jack can collapse and retract inside the runways to provide the best possible options for our premium alignment lifts 
    • The jack incorporates a proven and robust roller system with a half-inch diameter roller shaft to carry the jack load, and high-quality springs to allow the jack to settle on the rail
    • The arm pads are durable urethane with a steel lip


  • ALI Certified:

    • All models have been tested and validated by an independent third party to the ANSI/ALI automotive lift standard, ALCTV-2011


  • 14k Scissor Standard Bay Alignment Lift Models:

    • EELR787APKG SURFACE mount
    • EELR788APKG FLUSH mount
    • EELR789APKG SURFACE mount Locked & Lighted
    • EELR790APKG FLUSH mount Locked & Lighted
Expand ▼
14k Scissor Foundation Plan
File size : 16,514.64 Kb
14k Scissor Lift
File size : 1,794.25 Kb
Capacity Kg
Capacity 14000 lbs
Lifting times s
Lowering times s
Lifting height 72 inch
Lifting height mm
Maximum pad height from floor mm
Maximum pad height from floor inch
Drive-through width inch
Drive-through width mm
Motor 3 Hp
Power supply 230 VAC 1Ph 50/60 Hz
Distance between columns mm
Distance between columns inch
Short arm extraction mm
Short arm extraction inch
Long arm extraction mm
Long arm extraction inch
Minimum ceiling height mm
Minimum ceiling height inch
Minimum concrete thickness mm
Minimum concrete thickness inch
Weight 5490 lbs
Width Between Runways 38 inch
4 Wheel Alignment Wheelbase 88 - 155 inch
2 Wheel Alignment Wheelbase 180 inch
Console Dimensions DxWxH inch
Air Supply Requirements 90 - 120 Psi
Front Accessibility
Overall Length 271 inch
Service Wheelbase 194 inch
Overall Width 95 inch
Column Height inch
Column Width inch
Column Depth inch
Height of Lifting Fork inch
Length of Fork inch
Lifting Capacity Per Column lbs
Lifting Speed 80 s
Load Capacity Per Set of Four Columns lbs
Load Capacity Per Set of Six Columns lbs
Lowered Wheel Fork Height inch
Lowering Speed s
Runway Width 26 inch
Weight per Column lbs
Width of Lifting Fork inch